Tag Archives: Xen

Revisiting Virtulization

Posted on by
1

Its time to revisit virtulization. My home server homer is in dire need of some more diskspace, RAM and general cleaning up. It would probably help if the roles were split across a couple of VM’s. A bit of my development work requires a windows server or 2 and the rest, which is mainly web development is fine with running on Debian.

However, these days homer is showing his age. He is an old Dell, running only a P4 2.8 GHz chip. Hardware vitulization is not supported and previous attempts at running Vmware hasnt worked that well. I think its time to build a new server:

Requirements
1. Its got to be as quiet as possible (currently its in the bedroom, between our desks)
2. Low power consumption
3. Loads of diskspace (main house fileserver for movies) preferably in an LVM or maybe even some kind of RAID.
4. Enough RAM to run a few VM’s for various roles.
5. Low cost – its almost Xmas man!

 

 

Resizing Xen Disk Images

Posted on by
Reply

My Xen host was only created with a 4GB partition:

bart:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 4.0G 2.8G 1.1G 73% /
tmpfs 129M 0 129M 0% /lib/init/rw
udev 10M 24K 10M 1% /dev

With hindsight, this was far too small.
If you a using basic ‘file’ based images you can safely resize them:

First of all make sure you create a backup of your current image:
(Make sure that the image is not mounted or running.)

bart:~# cp hd.img backup.img

bart:~# dd if=/dev/zero of=hd.img bs=1M conv=notrunc count=1 seek=8000

This will resize the image to approx 8GB.

Now boot your host and expand the filesystem:

bart:~# resize2fs /dev/sda1
resize2fs 1.40-WIP (14-Nov-2006)
Filesystem at /dev/sda1 is mounted on /; on-line resizing required
old desc_blocks = 1, new_desc_blocks = 1
Performing an on-line resize of /dev/sda1 to 2048256 (4k) blocks.
The filesystem on /dev/sda1 is now 2048256 blocks long.

bart:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 7.7G 2.8G 4.6G 38% /
tmpfs 129M 0 129M 0% /lib/init/rw
udev 10M 24K 10M 1% /dev

:D

Xen Server Setup on Debian Etch

Posted on by
Reply

I have spent the morning reading up on Xen details. Im very impressed so far. It seems a great way of doing things. The only thing I am a bit worried about is that the processor in my test rig does not support hyperthreading, so I might not get any performance increase to begin with. However, the plan for the moment is to complete the Debian server and to install 3 guest OS’s: Windows 2000, Windows XP and a Debian server install. At the moment im following this giude : http://shearer.org/MinimalEtchXen It is geared to a nice minimal Etch install so should be perfect for my needs!

Wish me luck!

Dammit. Windows images will NOT run without a VT enabled processor. Anybody got a spare Dual-Core Intel Chip and board lying around spare? ;-)

Xen Thinking

Posted on by
Reply

Xen clustering is the way to go. Im thinking of creating a Xen install (Debian) on one of my faster boxes to perform the following roles:

Windows 2000 Server (Game Server)
Debian Linux Server (www, mail, ftp)
Debian Linux Server (internal file & print server)
Windows XP Pro (client test install)

I’ll let you know how I get on! :-)